Today I will show you how to make a 2 in 1 wood lathe machine from hand drill:
- Lathe
- Sander
Materials
Lathe (without sander)
- Bearing 608 ZZ x 4
- Bolt M8 x 65 x 1
- Bolt M8 x 80 x 2
- Bolt M8 x 100 x 4
- Flat washer 8 x 8
- Nut M8 x 4
- T-nut M8 x 2
- Threaded rod M8, length=300 (120+180) mm
- Wing nut M8 x 7
- Wood Screw 3.5×16 x 4
- Angle bar 10x15x1, length=200 mm
- Plywood 10 mm
- Plywood 12 mm
- Plywood 20 mm
- Lumber 15×30 mm
- Lumber 25×90 mm
- Lumber 30×50 mm
- Lumber 45×90 mm
- Lumber 50×50 mm
- Lumber 100×100 mm or piece of wood 75x90x120 mm
- Wood Chipboard or Plywood 16 mm
Plans
This content is locked
Share This Page To Unlock and DOWNLOAD PDF!
3D model
Plans3D%20modelDownload%203D%20modelTo%20make%20it%20I%20used:%20%09Homemade%20Drill%20press%20%09DIY%20Moxon%20vise){kind=link}
I’m 55 and disabled and always searching you tube for projects to keep me busy in my simple shop. These will give me not just projects to do but also some very helpful and very useful tools I can use!
Excelente, estou separando o material para fazero torno de madeira.
Thanks for sharing this plans,
You helped many peoples,
Thanks from amgeria
I never thought this could be done! How durable are those lathes? I mean why would buy a lathe that will cost me a few hundred bucks. Genius!
Good job, congrats. I’m going to make the sharpener, at last! Thank you
Bravo et merci beaucoup 😉
Merci beaucoup, c’est très généreux de votre part. J’adore ce tour à bois