Today I will show you how to make a DIY angle grinder stand without welding.
Materials
- Bolt M6 x 60 x 1
- Bolt M8x12 x 1
- Bolt M8 x 40x 1
- Bolt M8 x 60x 1
- Flat Head Machine Screw M6x20 x 2
- Flat Head Machine Screw M6x30 x 1
- Locknut M8 x 2
- Nut M6x 3
- Nut M8x 2
- T-nut M8 x 2
- Spring
- Threaded Insert M6 x 3
- Threaded rod M8, length=85 mm
- Truss head Wood Screw, L=32mm x 2
- Galvanized Steel Sheet
- Plywood 20 mm
- Stainless steel tube 10×1, L= (60+34) = 104 mm
- Steel angle 50x58x2, L=650 x 2
- Steel angle 25x25x3 mm, L=145 x 1
- Wood Screws 3.5×19
Angle Grinder Stand Plans
This content is locked
Share This Page To Unlock and DOWNLOAD PDF!
3D model
